Optimizing Low-Speed Wind Turbines: The Impact of Blade Angle and Profile

Авторы

  • Muhammad Izwan Khamzah Mechanical Engineering Study Program, Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Sidoarjo
  • Rachmat Firdaus Mechanical Engineering Study Program, Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Sidoarjo

Ключевые слова:

Wind Turbine Efficiency, Blade Angle Variation, Low-Speed Wind, NACA 0021 Profile, Renewable Energy

Аннотация

This study investigates the optimization of horizontal axis wind turbines for low-speed wind conditions in Indonesia, focusing on blade configuration. Through experimental methods, the research evaluates how variations in the number of blades, blade profiles, and particularly the alpha angle of the NACA 0021 rotor blade affect turbine efficiency. Findings reveal that adjusting the blade angle significantly enhances the power coefficient, offering a potential pathway to increase the efficiency of wind turbines under low-speed conditions. This advancement could contribute to more sustainable and efficient use of wind energy globally.

Биографии авторов

Muhammad Izwan Khamzah, Mechanical Engineering Study Program, Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Sidoarjo

Muhammad Izwan Khamzah is a scholar in the Mechanical Engineering Study Program at the Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, located in Sidoarjo, Indonesia. His research interests are primarily focused on the optimization of wind turbine technology, especially in low-speed wind conditions prevalent in Indonesia. Through rigorous experimental methods, Muhammad explores the influence of blade configuration changes, particularly in the alpha angle and profile of NACA 0021 rotor blades, on the efficiency of horizontal axis wind turbines. His work contributes significantly to the development of more sustainable and efficient wind energy systems globally.

Rachmat Firdaus , Mechanical Engineering Study Program, Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Sidoarjo

Rachmat Firdaus is a distinguished lecturer and researcher in the Mechanical Engineering Study Program at the Faculty of Science and Technology, Universitas Muhammadiyah Sidoarjo, Indonesia. He pursued his undergraduate and master's studies at ITS Surabaya, and his doctoral studies at Kanazawa University in Japan. Specializing in Energy Conversion, his expertise was further honed through his professional experience at PT Garuda Indonesia (Persero) Tbk. Rachmat has been actively involved in both internal UMSIDA research and projects supported by Kemenristekdikti. He also engages in community service initiatives through similar channels. His scholarly work includes publications in nationally accredited (Sinta) journals and internationally reputable journals, contributing significantly to the field of renewable energy and technology development.

Библиографические ссылки

Cao, Yiwen, Xu Qian, Tuifan Yu, Qi Jia, Surendra Sarsaiya, and Jishuang Chen, ‘Improving Biomass and Dendrobine-Type Total Alkaloids (DTTAs) Production of Dendrobium Nobile through Combining Temporary Immersion Bioreactor System (TIBS) with Endophyte MD33 Elicitation’, Plant Cell, Tissue and Organ Culture (PCTOC), 156.1 (2024), nine <https://doi.org/10.1007/s11240-023-02653-w>

Chang, Hong, Deyou Li, Ruiyi Zhang, Hongjie Wang, Yurong He, Zhigang Zuo, and others, ‘Effect of Discontinuous Biomimetic Leading-Edge Protuberances on the Performance of Vertical Axis Wind Turbines,’ Applied Energy, 364 (2024), 123117 <https://doi.org/10.1016/j.apenergy.2024.123117>

Dai, Yuanjun, Lei Zhong, Baohua Li, Zetao Deng, Jianping Wang, and Zhenxiong He, ‘Study on the Vibration Characteristics of Wind Turbine by Fused Blade Tip Structure,’ Ocean Engineering, 305 (2024), 117869 <https://doi.org/10.1016/j.oceaneng.2024.117869>

Deeney, Peter, Angela J. Nagle, Fergal Gough, Heloisa Lemmertz, Emma L. Delaney, Jennifer M. McKinley, and others, ‘End-of-Life Alternatives for Wind Turbine Blades: Sustainability Indices Based on the UN Sustainable Development Goals,’ Resources, Conservation and Recycling, 171 (2021), 105642 <https://doi.org/10.1016/j.resconrec.2021.105642>

Hao, Wenxing, Chun Li, and Fuzhong Wu, ‘Adaptive Blade Pitch Control Method Based on an Aerodynamic Blade Oscillator Model for Vertical Axis Wind Turbines’, Renewable Energy, 223 (2024), 120114 <https://doi.org/10.1016/j.renene.2024.120114>

Ho, Long, Matti Barthel, Diego Panique-Casso, Kaat Vermeulen, Stijn Bruneel, Xingzhen Liu, and others, ‘Impact of Salinity Gradient, Water Pollution and Land Use Types on Greenhouse Gas Emissions from an Urbanized Estuary’, Environmental Pollution, 336 (2023), 122500 <https://doi.org/10.1016/j.envpol.2023.122500>

Mbandi, Aderiana Mutheu, Christopher S. Malley, Dietrich Schwela, Harry Vallack, Lisa Emberson, and Mike R. Ashmore, ‘Assessment of the Impact of Road Transport Policies on Air Pollution and Greenhouse Gas Emissions in Kenya’, Energy Strategy Reviews, 49 (2023), 101120 <https://doi.org/10.1016/j.esr.2023.101120>

Park, Ji-Hyung, Hyunji Lee, Maidina Zhumabieke, Seung-Hee Kim, Kyung-Hoon Shin, and Boo-Keun Khim, ‘Basin-Specific Pollution and Impoundment Effects on Greenhouse Gas Distributions in Three Rivers and Estuaries’, Water Research, 236 (2023), 119982 <https://doi.org/10.1016/j.watres.2023.119982>

Pustina, L., C. Lugni, G. Bernardini, J. Serafini, and M. Gennaretti, ‘Control of Power Generated by a Floating Offshore Wind Turbine Perturbed by Sea Waves’, Renewable and Sustainable Energy Reviews, 132 (2020), 109984 <https://doi.org/10.1016/j.rser.2020.109984>

Shen, Zhuang, Shuguang Gong, Hongxiao Zu, and Weiyu Guo, ‘Multi-Objective Optimization Study on the Performance of Double Darrieus Hybrid Vertical Axis Wind Turbine Based on DOE-RSM and MOPSO-MODM’, Energy, 2024, 131406 <https://doi.org/10.1016/j.energy.2024.131406>

Zareian, Mohammad, Amin Rasam, and Pooyan Hashemi Tari, ‘A Detached-Eddy Simulation Study on Assessing the Impact of Extreme Wind Conditions on Load and Wake Characteristics of a Horizontal-Axis Wind Turbine’, Energy, 2024, 131438 <https://doi.org/10.1016/j.energy.2024.131438>

Загрузки

Опубликован

2024-05-03

Как цитировать

Khamzah, M. I. ., & Firdaus , R. . (2024). Optimizing Low-Speed Wind Turbines: The Impact of Blade Angle and Profile. Innovative Construction and Petrochemical Technologies, 1(1), 15–22. извлечено от https://icpt.ouk.kz/index.php/icpt/article/view/5